Peco Performance PRO School Serie Manual De Instrucciones página 4

•
READ OPERATINg MANuAL CAREFuLLY BEFORE ATTEMPTINg TO OPERATE THERMOSTAT.
• FOLLOW THE PERFORMANCE PRO INSTALLATION INSTRuCTIONS BEFORE PROCEEDINg.
• Failure to observe safety information and comply with instructions could result in PERSONAL INJuRY,
DEATH AND/OR PROPERTY DAMAgE.
• use this thermostat only as described in this manual.
• This is a 24 VAC low-voltage thermostat. Do not install on voltages higher than 30 VAC.
• Contact a qualified service person if at any time the thermostat does not operate properly.
• use care to avoid static discharge to the thermostat.
• To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use
only wiring with insulation rated for full thermostat operating voltage.
• To avoid potential fire and/or explosion, do not use in potentially flammable or explosive atmospheres.
• This product, when installed, will be part of an engineered system whose specifications and performance
characteristics are not designed nor controlled by PECO.
• All wiring and applications must conform to local and national building codes and ordinances Applications
and national codes must be reviewed prior to installation to assure the installation is functional and safe.
IMPoRTanT noTe: This thermostat was shipped with factory default settings. The thermostat's installer
may have configured the thermostat differently from the factory-default settings, and may have modified
or disabled certain features. Contact the installer or a service technician if there are questions about the
thermostat's configuration.
!
CaUTIon!
4