Brandson 301801 Manual De Usuario página 27

(1). Secure it using a M6*12 screw (2).
Turn the mounting ring (4) as shown in Figure (A) in the counter-clockwise direction
to loosen it and to position the heating element at the desired height.
Figure (A) also shows how to attach the power cable to the cable clip (13).
The inclination angle of the heater is up to 25°. Simply adjust it to the desired
position. This is shown in Figure (C).
7 Wall assembly
Drill four holes in the desired place for the wall bracket. Ensure that there are
no gas, water or electricity lines running through the wall. Fix the bracket (4) to
1
5
C
A
6
A
2
3
4
27
English