Aukey SK-M52 Manual De Usuario página 9

Notes
● The required settings may be in an 'Advanced' or 'Expert' section of the sound settings
● Refer to your TV's user manual for further details about sound settings and connections
Playing Audio via BT Connection
1. Turn on soundbar and then short-press the multi-function button to switch to BT mode with the LED indicator
flashing blue rapidly
2. Activate the pairing function on your phone or other compatible device and select 'AUKEY SK-M52'
3. If a code or PIN is required for pairing, enter '0000'
4. When successfully paired, you will hear a tone and the LED indicator will stay on
5. The remote control includes BT mode playback controls
Notes
● If your paired device is switched off or manually disconnected, the soundbar will automatically enter pairing
mode
● If the connected device exceeds the operating range, the soundbar will disconnect. The connection to the last
successfully connected device will be re-established once you re-enter wireless range. To connect to other
devices, repeat the above pairing steps
● There is no automatic shutdown in pairing mode. The soundbar will remain in pairing mode even if no device is
paired, so switch off if not in use
Playing Audio via 3.5mm Audio Input (Aux) Connection
1. Connect the soundbar to your PC, tablet, smartphone, TV, or other device using the included 3.5mm audio
cable or 3.5mm to RCA audio cable
2. Short-press the multi-function button to switch to audio input mode with the LED indicator lit up green
3. In this mode, playback can only be controlled on your connected device
Note
● For some computers, you may need to access the audio control panel to manually set the soundbar as the
default audio device
Playing Audio via USB Port
The soundbar automatically switches to USB input mode with the LED indicator lit up purple when a USB flash drive
is inserted (this mode isn't selectable on the soundbar or remote control unless a USB flash drive is connected).
1. Ensure that your USB flash drive contains MP3 or WMA audio files (other file types not supported)
2. Connect the USB flash drive to the USB port on the soundbar (or your own USB extension cable connected to the
USB port); music will automatically play
3. The remote control includes USB input mode playback controls
Notes
● Maximum storage size supported for USB flash drive is 32GB
● USB input mode won't function if the USB flash drive has no MP3 or WMA audio files
● When USB flash drive is removed, the soundbar will automatically enter audio input mode with the LED indicator
flashing green
● The soundbar automatically plays compatible audio tracks continuously in a loop in USB input mode unless you
manage playback with USB input mode playback controls
- 07 -