Specifi Cations - Hameg HM8037 Manual Del Usuario

TECHNISCHE DATEN TECHNISCHE DATEN
Referenztemperatur: 23 °C ±2 °C Referenztemperatur: 23 °C ±2 °C
Operating modes
Sine wave,
continuous, amplitude-regulated
Frequency range:
5 Hz bis 50 kHz,
4 ranges
variable control 10:1,
overlapping ranges
Frequency drift
(Frequency control in center position)
15 min. 0.08% (50 kHz range)
8 hrs. 0.6% (50 kHz range)
15 min. 0.08% (in all other ranges)
8 hrs. 0.5% (in all other ranges)
Frequency display
3-digit, 7-segment LED display
Display accuracy: ±1 digit
Distortion factor
5 Hz - 20 Hz: max. 0.03%
20 Hz -10 kHz: max. 0.01%
1 kHz: typ. 0.005%
10 kHz - 20 kHz: max. 0.03%
20 kHz - 50 kHz: max. 0.05%
Signal output (short-circuit proof)
Output voltage: 1.5 V into 600 Ω
Internal resistance: approx. 600 Ω
Amplitude fl atness: max. ±0.2dB (5 Hz to 50 kHz)
Attenuation: min. 60 dB
2 fi xed attenuators: each 20 dB ± 0.2 dB
variable control: 0 dB to 20 dB
Amplitude stability: 0.12% (4 hrs.)
Included in delivery:Low-Distortion Sine Wave Generator HM8037, Operating manual
Optional accessories: HZ33/34 BNC Test Cable; HZ22 50 Ohm feed-through
termination; HZ10 Silicone test leads
SPECIFICATIONS
Valid at 23 degrees C after a 30 minute warm-up period
S p e c i f i c a t i o n s
Synchronous output (short-circuit proof)
Output voltage: 2 V
Internal resistance: ca. 1 kΩ
Miscellaneous
The outputs can be isolated from the case ground by pressing
a key.
Power supply: +5 V/120mA
(from mainframe) +15 V/30 mA
–15 V/30 mA
(∑ = 6.3W)
Operating temperature: +10°C to +40°C
Max. relative humidity: 80 % (without condensation)
Dimensions (without 22-pole fl at plug):
(W x H x D) 135 x 68 x 228 mm
Weight: approx. 0.65 kg
Subject to change without notice
, sine wave
pp
15