Brave EZ Split PCLS13 Manual Del Propietario Y Operario página 12

Assembly Instructions
4. Slide cylinder and push plate assembly (1)
towards the engine until the trunnion pins
on the side of the cylinder fit into the slots
of the cylinder mounting bracket (2).
5. Install two retaining plates (3) using four
5/16 x 3/4 inch long hex bolts (4) and
locknuts (5).
using the two 1/2 inch wrenches.
6. Slide the hose clamp onto low pressure
hose (1). Push the hose onto the fitting
and securely tighten the hose clamp with a
flathead screwdriver.
7. Thread high pressure hose (2) onto the
control valve fitting.
using a crescent wrench.
Brave
Tighten the nuts securely
Tighten the hose
3
4
10
1
2
EZ-25
5
EZ-26
800-350-8739