nOtICE OF SaFEtY SIGnS On tHE PRODUCt
Danger – risk of damage to equipment if the instructions are not followed.
Electrical Hazard – Failure to follow the instructions may result in electric shock and injury
to persons.
the equipment is completed protected through double insulation.
Warning
Follow the precautions and instructions as indicated below in order to ensure your safety and that of
your environment, and to prevent your device from any possible damage.
Warning: a switch-isolator compliant with EN60947 standards is used as disconnect device.
it must be easily accessible and be installed close to the power. it shall disconnect all active
polarities.
the
PRODUCt
Disposal of waste by users in private household in the countries of European Union.
this symbol on the product or on its packaging indicates that the product must not be
disposed into household waste. instead, it shall be your responsibility to bring the waste to a
collecting station especially provided for recycling of electric and electronic components. the
separate collection and recycling of your waste will contribute to conserve natural resources
and to ensure a recycling that is safe, environmentally and health friendly.
technical features (refer to Chapter 1.8 Dimensions of clocks)
Power supply
Dimensions
Operating conditions
The product contains a non-replaceable lithium battery.
MDE-LEDI-1099V3.2
is intended for use indoors only, at an altitude below 2000 meters.
Voltage
Frequency
Current
Length
width
Height
maximum Operating tempature
Humidity
COntEntS
230Vac
50-60Hz
0,1 a max
XXXX mm
XXXX mm
XXXX mm
50°C
90 % non condensing
43