General Characteristics; Available Versions (According To Model); Standalone Version; Parallel Minute Impulse Input - Gorgy Timing LEDI Guia Del Usuario

► Digital display of Hours, minutes and seconds ("s" option),
7-segment electroluminescent diodes.
► Tilt of figures: 10°.
► Power supply:
alternating current: 230 Vac (+/- 10%) / 50 - 60 Hz, 115 Vac (option)
Direct current (as option) : - 48 VDC : no polarity.
Power over Ethernet (option): POE, POE +.
► Consumption: 10 w on the average, varies according to model.
► Data saved with a built-in Lithium battery:
► 3-colour LED display (red/green/yellow). white or blue as optional feature.
► Visual indication of the status of sync via the two second dots (except standalone version)
LEDI range: standard case – Wall or flush mounted
®
LEDI REVERSO and LEDI
®
with ceiling or side bracket

2.1. aVaILaBLE VERSIOnS (aCCORDInG tO MODEL):

2.1.1. Standalone version:

Built-in 32-kHz tCXO quartz time base

2.1.2. Parallel minute impulse input:

1-minute impulses - inverted 24V per minute.
Duration of impulse: 0.1sec to 5 sec.
impulse consumption: 6 ma/24V
Extinction of the two second dots: 120 seconds without synchronization
2.1.3. Series connection ½-minute impulse input:
series connection with an external 39-Ohm shunt.
½ minute impulses - inverted every ½ minute.
Duration of impulse: 0.1 sec. to 5 sec.
impulse consumption: 1.25 V
Line intensity: 60 ma to 120 ma
Extinction of the two second dots: 60 seconds without synchronization
MDE-LEDI-1099V3.2
2. GEnERaL
- 24 VDC, 12 VDC : "+" = brown wire; "-" = blue wire".
POOL range: Single or dual sided - Wall Mount - Mounting
®
CHaRaCtERIStICS
51