3.4.4
Reset diaper change timer
1. Press
on the parent unit.
The timer will display on the screen.
2. Press
to reset the timer to 00-00, then press
Each key press represents an interval of 30 minutes, up to an interval of 24
hours.
3. Press
or
The screen will display
The
diaper change timer button remains lighted when the timer is
running.
NOTE
If no key is pressed within 10 seconds after adjusting the timer in step 2, the
adjusted timer will be stored automatically, but the timer will not start.
To start the timer, press
When the time limit is reached, the
and the parent unit will emit an alarm for 30 seconds. Press any key on the
parent unit to stop the alarm and reset the timer to
3.4.5
Set sleep timer
1. Press
on the parent unit.
-
+
2. Press
or
Each key press represents an interval of 30 minutes, up to an interval of 24
hours.
If the next napping time is 2 hours later, press
until
02-00
is displayed.
3. Press
or
The screen will display
The
sleep timer button remains lighted when the timer is running.
3.4.6
Reset sleep timer
1. Press
on the parent unit.
The timer will display on the screen.
16
to save and start the adjusted timer.
SAVED
before returning to idle screen.
and then press
to adjust the timer.
to save and start the timer.
SAVED
before returning to idle screen.
-
+
or
or
.
diaper change timer button will flash
.
00-00
-
+
or
Using Your Digital Audio Baby Monitor
to adjust the timer.
to adjust the timer