iENERGY i-Manager Guia De Instalacion página 9

Set Up the i-Manager
After plugging in the i-Manager, the screen will
display the IP address as "169.254.0.1" on the
left side of the screen.
The screen will switch from the given IP to
date/time information within 10 seconds.
Within a few seconds, a new IP address is
issued by local router on the i-Manager screen.
Open internet browser and enter the new IP of
the i-Manager in your browser's address bar.
Make sure that the i-Manager plugs directly into the electrical outlet (wall socket) closest to the
AC load center. Do not use power strip or extension cord.
This ensures that i-Manager receives the strongest possible signal from each i-micro inverter.
New
7