Manual Mode - Philips HD9190/30 Manual De Instrucciones

EnglisH
10
Note: During the first 5 minutes of the steaming process, the turbo light lights up. This indicates that the
steamer uses extra power to heat up quickly.
3 When the steaming process has finished, the appliance beeps 5 times and then automatically
switches to the keep-warm mode (see section 'Keep-warm mode').
4 After use, carefully remove the lid.
Beware of hot steam that comes out of the appliance when you remove the lid.
Note: To prevent burns, wear oven mitts when you remove the lid. Remove the lid slowly and away from
you. Let condensation drip off the lid into the steaming basket.
Note: Use a kitchen utensil with long handles to remove the food from the steaming baskets.
5 When you remove a steaming basket, let condensation drip off the basket in the underlying
steaming basket or the drip tray.
6 Remove the plug from the wall socket and let the steamer cool down completely before you
remove the drip tray.
7 Empty the water tank after each use by tilting the base backwards and pouring the water
from the back of the base (Fig. 3).
Be careful when you remove the drip tray and empty the water tank, because the water in both
of them may still be hot, even if the other parts of the appliance have cooled down already.
Note: If the water runs out during steaming, the 'water tank empty' light goes on to indicate that you
need to refill the water tank (Fig. 15).
Note: If you want to steam more food and need more water, you can add small quantities of water
through the water refill spout to refill the water tank.
Note: The appliance automatically goes into the standby mode if it has not been used for 2 minutes.
Press the start/stop button to activate the control panel again.

Manual mode

Use this mode to activate the steamer quickly.
1 Press the timer up or down button to select the required steaming time (Fig. 16).
2 Press the start/stop button to start steaming (Fig. 17).
The steaming process starts. The start/stop light and the turbo light flash slowly and the
,
timer counts down the set steaming time (Fig. 18).
When the set steaming time has elapsed, the appliance beeps and switches to the keep-warm
,
mode. The keep-warm light goes on (Fig. 19).
program mode: meal program
Use this program to prepare a complete meal with different preparation times for each steaming
basket. The appliance automatically starts to steam the food in the steaming basket with the longest
preparation time and beeps to let you know when to place the steaming basket or baskets with a
shorter preparation time. The last steaming basket has the lowest preparation time.
Note: If you want to prepare a meal without using all three steaming baskets, only set the timer for the
steaming baskets you are using.
1 Press the meal program button. (Fig. 20)
The light in the meal program button goes on and the three steaming basket buttons light
,
up (Fig. 21).
2 Press steaming basket button 1, 2 or 3 to select one of the steaming baskets. (Fig. 22)