Comelit Group PLANUX Serie Manual Del Usuario página 8

WARNING
Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for modifications made
by third parties for any reason or purpose, and for the use of accessories and
materials which are not originals.
Attention In order to reduce the risk of faults and electric shocks:
• Do not open the apparatus or carry out any repairs yourself. If necessary, request the services of qualified
personnel.
• Do not insert objects or pour liquids into the device.
• Clean using a damp cloth. Do not use alcohol or other aggressive products.
Description of the monitor and information for the user Fig. 1.
1. Audio key.
2. Door release key.
3. Menu key: Use this key to access and exit the menu, and to go back one level in the menu.
If left idle, the monitor exits menu mode automatically after 15 seconds.
4. Confirm key: Confirms the selection made and provides access to the next menu level.
5. Navigation keys: Use these keys to scroll through the menu optionsand modify the value of the selected option.
6. Switchboard call / Intercom call key (programmable).*
7. Generic Actuator key (programmable).*
8. Self-Ignition key (programmable).*
9. Privacy (Doctor) key.*
NOTE: If, after a key is pressed, it flashes for 4 seconds, this means the function is not available or the
system is engaged.
Using monitor Planux basic functions (for complete functions see FT/PLANUX/01, FT/PLANUX/03
www.comelit.eu).
·
The two LEDs flash in response to a call Fig. 2.
To activate the audio line, press
To activate the electronic lock, press
been activated.
·
Press to activate the switchboard call or intercom call function. A call is transmitted to the
corresponding switchboard (if present) or an intercom call.
·
Press to activate the generic actuator function. The monitor will beep to confirm activation.
·
Press to activate the Self-Ignition function. The image from the corresponding external unit appears
on the monitor. By pressing
·
Press to activate the Privacy function. The red LED will light up to indicate that the function has been
activated.
FT PLANUX 2 6
and wait for the LED to illuminate steadily before speaking.
. The monitor will beep to confirm that the door lock release has
repeatedly, you can switch between the external units (MAX 2 if present).
* See FT/PLANUX/01, FT/PLANUX/03