Frequently Asked Questions - Luggie Smart Fold Manual De Instrucciones Para El Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4. DO NOT use an extension cord to connect the charger onto the charging unit of your
Luggie unless absolutely necessary. Use of an improper extension lead could
5. DO NOT use the charger if it has received a sharp blow, been dropped or otherwise
misused in anyway.
6. DO NOT dismantle the charger, poke or drop objects through the slots in the charger
case.
7. DO NOT unplug or interrupt the recharge cycle until the charging cycle has been
completed. Failure to observe this instruction can damage the integrity of the
battery.
8 . There is a drive inhibit function on your scooter. The scooter cannot be driven
when the charger is plugged into your Luggie.
9. Avoid exposure to heat when charging your battery.
YOUR GUIDE TO SAFE AND LASTING BATTERY
1. For longest life of your battery, your battery should be recharged after use,
preferably overnight.
2. When storing your Luggie and battery for an extended period, fully charge your
battery and remove the battery from the leads on your Luggie scooter. The
battery should never be stored fully discharged. Fully discharging the battery pack
before extended storage will put your battery in a "sleep mode" which could
render it un-chargeable when you are ready to use your scooter.
3. If your Luggie has been stored for some time, ALWAYS recharge your battery before
use.
4. Every six months, check the connection on the battery pack. Make sure the
connection area is clean.
5. Your battery carries a limited manufacturer warranty which is subject to a
stringent wear and tear clause. Any gradual deterioration in performance is
normally associated with fair wear and tear. Misuse or accidental damage is not
covered by the manufacturer's warranty.
CHARGING YOUR BATTERY AWAY FROM YOUR SCOOTER
In circumstances when your scooter is stowed in your car, your battery can be recharged
away from your scooter with the optional Luggie home docking station. Simply connect
the 3-pin plug on your charger to the home docking station before connecting it to the
wall socket. Insert your Luggie battery onto the home docking station to start charging the
battery away from your scooter.
Q: How do I turn on Luggie scooter?
A:
Locate the on/off switch below the handlebar on the right side. If you DO NOT see a
solid red on the switch, check to make sure the battery has been properly installed.
Refer to the user's manual for diagnosis.
Q: What does the magnetic brake release do?
A:
In time of emergency or when your battery is out of power, disengaging the
magnetic brake release will inhibit you from driving the scooter; but, it will allow
your scooter to be pushed freely by an attendant.
25

FREQUENTLY ASKED QUESTIONS

Publicidad

Tabla de contenido
loading

Productos relacionados para Luggie Smart Fold

Este manual también es adecuado para:

Easy go

Tabla de contenido