ABB M22001 Serie Manual Del Usuario página 7

ABB-Welcome
No. Function
1 Handset
For an incoming call, pick up the handset to activate communication within
30 seconds. Hang up the handset to end the call.
2 Unlock button
2A Press this button to open the door at any time.
2B auto-unlock: the door is automatically opened for an incoming call.
(Hold this button for over 10 seconds until the blue LED turns on; the
same operation will switch off the function and the blue LED will turn off .)
3 Programmable button
3A *Programmable for additional functions, e.g. call guard unit, intercom ,
etc.
3B Default function of button 1 is the release of the lock connected with an
4 Three-level selector for call volume adjustment (maximum/medium/
mute).
5 LED (Red)
- indicating that the
door is open over the
set time (sensor must
be connected)
6 LED (Blue)
- indicating that the
system is busy
7 **Induction loop function
*For use, please contact your electrical installer.
Pos : 22 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ü r all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
**This function is only available in M22003-.
|
outdoor station (COM-NC-NO).
- when any button is
pressed.
- indicating an
incoming call
- indicating mute.
- indicating auto-
unlock
— 6 —