Publicidad
Idiomas disponibles
Idiomas disponibles
ABB-Welcome
4.2
Settings
4.2.1
Ringtone type settings
Pos : 21 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Bedi enelemente - 83220- AP- xxx @ 18\mod_1303212853605_15.doc x @ 103673 @ @ 1
1.
Hold "
+
blue LED and red LED flashing simultaneously).
2.
Press
to set the next ringtone type for the doorbell. Long press this button
for about 3 seconds to repeat the ringtone, if desired.
3.
Press
to set the next ringtone type for a call from an outdoor station.
4.
Press
to set the next ringtone type for an intercom call from other apartments
or the guard unit.
5.
Hold "
+
exit the system settings mode.
4.2.2
Default outdoor station settings
Pos : 21 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Bedi enelemente - 83220- AP- xxx @ 18\mod_1303212853605_15.doc x @ 103673 @ @ 1
1.
Pick up the handset, hold
station setting mode.
2.
Press
button to set the address of the default outdoor station. ( The value is
indicated by the flash times of the red LED. It can be set from 1 to 9. The default
setting is 1.)
3.
Hold
for about 3 seconds or put down the handset to save the setting and
exit the settings mode.
4.2.3
Programming the auxiliary buttons
Pos : 21 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Bedi enelemente - 83220- AP- xxx @ 18\mod_1303212853605_15. doc x @ 103673 @ @ 1
Each programmable button is available only after setting has been selected. These
buttons can be set for different functions, e.g. call guard unit, intercom call , or
controls switch actuator.
1.
Enter the programming mode.
Hold the programmable button for 3 seconds in the standby mode to enter the
programming mode.
2.
Set the function for each programmable button.
Check the needed function and press
code that is indicated by the flash times of the blue LED.
● The function code can be changed: 0->1->2->3->4->5->0.
|
" for about 3 seconds to enter the system setting mode (with
" for about 3 seconds to save the selected ringtone type and
for about 3 seconds to enter the default outdoor
to program the corresponding function
— 7 —
Publicidad
Capítulos
