SYNQ SMP 16.42 Manual De Instrucciones página 8

ENGLISH
To use the mixer as your default input/output device (for system sounds and audio recording software),
ensure that it is set for playback and recording in the Audio tab.
The volume can then be set by pressing the Volume button
Getting Started with MAC OS X
Connect the mixer to your mac by using a standard USB cable. The LED will light up to indicate it is receiving
USB power. The MAC will recognize the USB audio device and automatically install a universal driver.
To select the mixer as the computer's audio input, open the System Preferences from the dock or the main
Apple Menu.
SYNQ 11/117
®
OPERATION MANUAL
SMP16.42
ENGLISH
Next: open the Sound preferences.
Now, click on the Input tab and select USB Audio Codec. You may notice that the Volume slider sets itself to
the highest level. This will allow you to use the level controls of the mixer at their full range.
Then click on the Output tab and select USB Audio Codec. You may notice that the Volume slider sets itself
to the full level. You may notice that the Volume slider sets itself to the highest level. This will allow you to
use the level MAIN controls of the mixer to set the exact output level.
SYNQ 12/117
®
OPERATION MANUAL
SMP16.42