User Registration - Kannad SafeLink SOLO Manual Del Usuario

IncLuded WIth your SAFeLInk IncLuded WIth your SAFeLInk
SoLo PLB
Buoyancy pouch
Lanyard
Universal pouch
rAdIo LIcenSe
U.S. users are not required to hold a radio license
for a PLB. Other national administrations may
require the PLB user to be licensed, for further
advice check with your dealer or contact your
national communications licensing authority.

uSer regIStrAtIon

The PLB's unique identifier must be registered
with the national authority indicated in the white
area on the rear of the PLB. Complete the user
registration form and return it to the address
indicated on the form. Some national authorities
allow online registration, a good starting place
is the online emergency beacon registration
database called IBRD at www.406registration.
com. IBRD will not accept all registrations and
where appropriate you will be re-directed
to your national authority. Some countries
(including USA and UK) will send the registered
user a DECAL label which you are obliged to fit
to the rear of the PLB as 'proof of registration'.
Battery
expiry date
country name
& hex Id
Fit "proof-of-
registration" decAL
label here
oVerVIeW
red pull handle
Pull to expose antenna
only pull in an emergency
Pulling breaks the plastic anti-tamper seal that
can not be reset by the user
White indicator Light
Flashes every 3 seconds once PLB is active,
Long flash every 50 seconds means satellite
transmission OK
Flashes twice a second when GPS is searching
3 rapid flashes means GPS location sent
Antenna
Unwraps and stands vertical once cover is off
gPS antenna zone
Do not obstruct
Needs a clear view of the sky for best operation
on button
Press once to activate PLB
When the PLB is on, push the ON button again to
make the indicator light flash an SOS signal pattern
teSt / oFF button
Push and hold to start the self test
feature, a flash of white light indicates that the
self test is successful
Once PLB is active
Hold TEST to turn PLB off
eyelet for lanyard
5