Powering The Case Fans; Installing The Front I/O Connectors; Frequently Asked Questions - Corsair CARBIDE Serie Guia De Instalacion

CARBIDE SERIES
®

9. Powering the case fans

After locating your 3 or 4
pin fan headers on your
motherboard (see your
motherboard's manual
for fan header locations),
plug in the included
fan cable.

10. Installing the front I/O connectors

See your motherboard's
manual for front panel header
locations and pin-outs.
USB 3.0
USB 2.0
9
88R
POWER SW HDD LED POWER LED –
HD AUDIO RESET SW
POWER LED +

Frequently asked questions

1. How do I remove the I/O Panel ?
If needed, you can uninstall your I/O panel by removing the front fascia
(step 5) then unscrewing the 2 screws at each side of panel. (see drawing).
2. Does the polarity matter with the I/O panel's power and reset header?
No, only the LED headers.
3. Who should I contact if I received my case damaged or one of the fans is
no longer working?
Please go to support.corsair.com and request an RMA so that we can
replace the damaged part(s).
4. Where can I mount a fan?
Fan mount locations
Front x2 120mm
Top x2 120mm
Rear 120mm (included)
Bottom
Side
Mid
To learn more about this case visit the product page at corsair.com.
x
x
x
10