EN
22
RADIO MODE
You can program a maximum of 20 preset radio stations (FM).
1
Press the SOURCE button to select FM mode. The unit is then in radio
mode.
2
Select the desired radio station by pressing the FORWARD/BACK
button.
3
When you have found a station you want to store, press the MEM
button on the remote control. The display shows [P01]. Press MEM+/
MEM- until the desired memory location number appears on the
display. Press the MEM button again to store the current station.
4
Press and hold the MEM button to start a station scan. All available
stations are stored in the order of their reception strength. The first
stored station is played automatically.
Note: For best reception, pull out the antenna completely and adjust its
position.
AUX MODE
You can play music from an external audio device, such as an MP3 player.
For this you need a RCA cable (not included).
1
Connect an RCA cable to the Auxiliary Input. Connect the other
end of the RCA cable to the audio output on your DVD player, stereo
system, gaming system or television.
2
Press the power button to turn the unit on.
3
Press the SOURCE button to switch to Aux In mode.
4
Use the controls on the connected device to begin playing audio routed
through the unit.