Startup; Use; Preparation - AMC EasyQuick Manual De Instrucciones

ƒ A dirty valve that isn't operating smoothly, an incorrectly inserted sealing ring, or the in-
correct placement of the EasyQuick can cause the lid to lift slightly during cooking and hot
steam to escape all around.
ƒ When the EasyQuick is placed on a hot pot, hot steam surges out of the steam valve.
ƒ Always position the steam valve on the pot so that it's facing away from the body. This
prevents coming into contact with the hot steam that's released from it.
ƒ Do not touch hot stainless steel parts or the steam valve. Only touch pot handles and the
EasyQuick's Visiotherm E.
ƒ Always hold a pot handle with one hand when removing the EasyQuick. Otherwise, the pot
may tip over and hot food may leak out.
3.4.

Startup

Clean the EasyQuick before first use (see Chapter 5 Cleaning, Care, and Maintenance).
4.

Use

The EasyQuick can be used with suitable AMC pots and pans (see Chapter 1.1.).
4.1.

Preparation:

ƒ When steaming with the EasyQuick, sufficient liquid must always be added for steam to be
generated.
Recommended amounts of liquid for the EasyQuick:
ƒ For 20 cm pots:
ƒ For 24 cm pots:
ƒ For oval pots: at least 200 ml
ƒ Make sure that the liquid level is not higher than the perforated bottom surface of the pot
insert. For longer cooking times, add liquid as required.
Always ensure that there is enough liquid in the pot; otherwise, the pot may be damaged.
Be sure to follow the descriptions and tips in "AMC Cooking Methods".
at least 120 ml
at least 150 ml
17