Printing Modes; Adjusting Document Edge - Pyramid 3550SS Guia Del Usuario

SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3550SS/3600SS

PRINTING MODES

The 3550SS/3600SS can be set to print automatically or manually using the SET MODE
feature. When set to AUTO the clock will print whenever the actuator is activated.
When set to MANUAL, the clock will only print when the "manual button" located in the
left hand corner above the display screen is pressed.
Manual button

ADJUSTING DOCUMENT EDGE

The actuator can be adjusted to accommodate different document widths.
1
Place clock on its side so the viewing window is facing towards you.
2
Locate the "actuator adjustment knob" on the bottom of the clock.
3
Push "actuator adjustment knob" in while sliding the actuator back and forth to
adjust position.
PRINTING MODES & ADJUSTING DOCUMENT EDGE
Actuator
11