Replacing Ribbon Cartridge - Pyramid 3550SS Guia Del Usuario

SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3550SS/3600SS

REPLACING RIBBON CARTRIDGE

1
Unlock and remove cover.
2
(UP) for 3 seconds to park ribbon carriage.
Press s
3 Unplug time clock *IMPORTANT*.
4 Turn clock on its side so ribbon cartridge & holder are on top.
5
Slide actuator to far left (see diagram).
6 Remove old ribbon cartridge by holding tab and lifting up.
7
Snap in new cartridge.
8
Replace cover, lock unit & plug in.
9 Feed time card through unit to test print quality.
10 Readjust the actuator.
Slide actuator
far left
If ribbon is not completely over print head the resulting print will show incomplete
characters. If ribbon cartridge is not completely snapped in holder, the resulting print
will be increasingly lighter.
pyramidtimesystems.com REPLACING RIBBON CARTRIDGE
Ribbon clips
Ribbon tabs
13