Connect To A Wi-Fi Network - Dragon Touch M7 Manual De Usuario

Note:
1. Users are responsible for all charges with concerned Apps if there is any.
2. Manufacturers/sellers are not responsible for apps that are incompatible with the device.
3. In some cases, there may be no icon in the App Panel after an App is installed. Possible
reasons may be that this App is not compatible with your OS or the downloaded file is
a broken one so you may need to download a full version.
If you install and use an OS other than the one provided by the manufacturer, it may cause
your device to malfunction, therefore, your device will no longer be covered by the
warranty in this condition.

CONNECT TO A WI-FI NETWORK

The Notification bar displays icons that indicate your tablet's Wi-Fi status.
Notification that an open Wi-Fi network is in range.
Connected to a Wi-Fi network (waves indicate connection strength).
[no icon] There are no Wi-Fi networks in range, or the Wi-Fi radio is off.
1. Turn on the Wi-Fi radio if it is not already on. To turn on Wi-Fi:
a. Go to the Home screen: Press the home button.
b. Open the Settings menu: tap the icon right up on the home screen to get into the
launcher, then tap settings icon.
c. Open the Wireless & networks menu: Slide the icon to ON status.
7
When Wi-Fi is on, the tablet will look for and display a list of available Wi-Fi networks.
Note: If a network that you have connected to previously is found, the tablet will connect
to it. If you don't see your network in the list, you can force the tablet to re-scan. To scan
for networks, tap the Menu key, and then touch Scan.
2. Select an available Wi-Fi network to connect to:
In the same Wi-Fi settings menu above, tap a network in the list.
If the network is open, the tablet will prompt you to confirm connection to the network.
Tap "Connect" to confirm.
If the network is secured (as indicated by a Lock icon), the tablet will prompt you to enter
a password or other credentials. Tap the Wireless password box to show the on-screen
keyboard and then use it to enter the password. Tap "Connect" to confirm.
Tap "Connect" to confirm.
When you have successfully connected to a Wi-Fi network, the Notifications bar at the
upper right of the screen will show a Wi-Fi signal indicator.
Note: To learn about how to add a Wi-Fi network when it is not in range or when the
router is set to obscure the network name (SSID), or to configure advanced Wi-Fi options,
please refer to the manual.
8