Technical Data; Range Of Use - T.I.P. MSC 4/11 Instrucciones Para El Manejo

Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.

2. Technical Data

Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
1)
Max. flow rate at 0 m (Q )
max
1)2)
Flow rate at 27 m
1)2)
Flow rate at 64 m
Max. pressure
1)
Max. delivery height (H )
max

Max. submersion depth
4)
MEI
Max. size of the solids being pumped
Max. fluid temperature (T )
max
Max. cut-in frequency in one hour ³
Length of connection cable
Cable type
Weight (net)
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced outlet.
2)
Optimal working range
3)
Your submersible electric motor accumulates a certain amount of heat each time it is switched on. It must run for some
period of time during which it has the opportunity to dissipate the heat. If too many starting cycles in short time are called
for, your motor and/or pump may be damaged.
2.1. Information according to directive 2009/125/EG
4)
Minimum Efficiency Index" (MEI) is a dimensionless variable for hydraulic pump efficiency at their best operating

3. Range of use

Deep-well pumps from T.I.P. are specially designed and most efficient submersible pressure pumps for
discharging water from great depths. Owing to their compact design and professional technology, these pumps
can be used even in narrow bore-hole wells and shafts. These high-quality products with their convincing
performance data were developed for various applications involved with irrigation and for feeding on the liquid
being discharged under high pressure.
The units are suitable for discharging clean, clear water containing solids up to the maximum size specified in the
technical data.
10
)
MSC 4/11
230 V~ / 50 Hz
1,200 Watt
IPX8
39.59 mm
(1 ¼"), female
5,500 l/h
4,500 l/h
1,200 l/h
7.0 bar
70 m
27 m
≥ 0,40
2 mm / 100 g/m³
35 °C
20, evenly distributed
30 m
EPR 4 x 1,5 mm²
~ 16.3 kg
71,5 x 9,7 x 9,5 cm
30175
point as well as with partial loading and
overloading. The MEI reference value for
water pumps with the best operating
efficiency is ≥ 0.70. Information on the
efficiency reference value can be found under
http://www.europump.org/efficiencycharts.
The corresponding reference curves for the
MSC series pumps can be found at.MEI =
0.40 for Multistage Submersible 2900 rpm.
The operation of this water pump can be
more efficient and economic at different
operating points, if for example it is controlled
by means of a variable speed controller,
which adapts the pump operation to the
system.
2