Lanaform Tactile Manicure Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
or any discomfort in the hands while using this product, stop using it temporarily. If you have a more violent
reaction, please consult your doctor.
• Only use this appliance for its intended use and according to the directions for use set out in this manual.
• Using the «Tactile Manicure» is not a substitute for a visit to a treatment salon.
ITEMS INCLUDED IN THE MANICURE/PEDICURE BOX SET
A) Sapphire point
B) Rounded sapphire point
C) Fine grain sapphire cone
D) Coarse grain sapphire cone
E) Thin sapphire shaping disc
F) Thick sapphire shaping disc
G) Polishing cone
H) Main unit
I) Touch speed control (+/-)
J) Touch on/off switch and rotation direction
indicator ("green" = clockwise;
"red" = anticlockwise).
K) Detachable LED light cover.
L) Transparent cover to protect against «flying» residues.
M) Box with zip fastening
INSTRUCTIONS FOR USE
1) The «Tactile Manicure» operates via an adapter. First connect the end of the power supply cable to the input
connector located on the main unit. Then plug the adaptor into a power socket.
2) Once the adaptor and appliance are connected, the symbols «
appliance emits a noise and the «
changes from «green» to «red». The «Tactile Manicure» is then in standby mode and ready for use. (Fig. 2).
3) Then attach the desired accessory to the head of the main unit. To remove the accessory, pull firmly on the
base. (Fig. 3).
4) To switch the appliance on, slide your finger in the direction of the arrow shown on the main unit «
(Fig. 4). The appliance comes on and the «
movement.
5) Using the same movement, you can also select the desired direction of rotation. When the «
is green, the appliance operates in a clockwise direction. When it is red, it operates in an anti-clockwise
direction. (Fig. 5).
6) Then start the treatment by selecting the speed of rotation using the «
appliance is very powerful. We recommend you start by selecting a moderate speed to familiarise yourself
with its operation. Generally we recommend using a low speed for finger and toe nail treatments. A higher
speed should be used to treat thick calluses and dead skin.
7) The «Tactile Manicure» also has a detachable LED light. Once the appliance is operating, the light comes on.
If you do not wish to use it, remove the light cover. (Fig.6). Make sure you follow the direction of assembly
for this light, as shown in the diagram. (Fig. 7).
M
K
B
L
» and «
» symbols go out. Only the «
» and «
» keys light up. To switch it off, repeat the same
Tactile Manicure
(Fig. 1)
F
E
D
C
», «
» and «
» come on. The
» indicator flashes and
» and «
» speed control. This
EN
I
J
H
G
A
»
» indicator
5

Publicidad

Tabla de contenido
loading

Tabla de contenido