Remington BS1812A Manual Para El Usuario página 9

TRIMMER ASSEMBLY
ATTACHING ADJUSTABLE FRONT
HANDLE
1. Remove the knob and bolt from front
handle (see Figure 10).
2. Place the handle on the trimmer/edger
shaft between the rear handle and shaft
collar. Snap handle onto shaft (see Figure
11).
3. Insert bolt back into the front handle (see
Figure 12).
4. Loosely screw knob onto bolt (see Figure
13).
5. Adjust handle to the most comfortable
position and tighten the knob fi rmly. Do
not overtighten the knob.
Figure 10 - Removing knob and bolt from
handle
FPO
Figure 11 - Placing handle onto shaft
9
FPO
Figure 12 - Inserting bolt into handle
FPO
Figure 13 - Screwing knob onto bolt
www.desatech.com