Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A.
Mower Side Suspension Arms
Q. Deflector Shield
5, INSTALL
ANTI-SWAY
BAR (S)
(IF EQUIPPED)
ANTI-SWAY
BAR
(S)
Towards
Towards
Transaxle
Mower Deck
.
Pivot the integrated
washer
end of anti-
sway bar (S) towards mower deck bracket
on right side of mower. Insert integrated
washer end of bar into hole in rear mower
bracket
(D). Move mower as needed to
insert integrated
washer end of bar into
rear mower bracket
(D).
.
Secure
with small
washer
and
small
retainer
spring as shown.
90 ° End
Integrated Washer End
•
From
right side
of mower,
first
insert
90 ° end of anti-sway
bar (S) into hole in
transaxle
bracket
(T), located
near left
rear tire in front of transaxle.
NOTE: Flashlight
may be helpful.
Anti-Sway
i)
'_
h
Bar (S)
i I
r
Transaxle
Bracket (T)
Located Between Rear Tires
NOTE: Depending
on model, bracket (T) may
be different than shown but hole for anti-sway
bar will be in same position!location,
6. ATTACH MOWER
SIDE SUSPENSION
ARMS
(A) TO CHASSIS
°
Position front hole in side suspension
arm
(A) over pin on outside of tractor chassis
and secure with large washer
and large
retainer
spring
(B).
°
Repeat on opposite
side of tractor,
A. Mower Side Suspension Arms
B o Retainer Spring
D. Right Side Rear Mower Bracket
7. ATTACH
REAR LIFT LINKS (C)
•
Insert rod end of rear lift link (C) into hole
(U) in tractor
lift shaft
suspension
arm
and pivot link down to mower.
•
Lift rear corner of mower and position slot
in link assembly
over pin on rear mower
bracket (D) and secure with large washer
and large retainer
spring.
°
Repeat on opposite
side of tractor.
10
Publicidad
Tabla de contenido
