Configuration - D-Link DWR-933 Guía De Instalación Rápida

CONFIGuRATION

CoNNECT YouR DEViCE - ViA WiRELESS
CoNNECT YouR DEViCE - ViA uSb CAbLE
DWR-933
Step 1:
Turn on the DWR-933 by pressing and holding the power button until
the "Welcome" message appears on the display.
Step 2:
Connect your PC to one of the DWR-933's wireless networks.
By default, the settings are:
2.4 GHz SSID: dlink_DWR-933-xxxx
5 GHz SSID: dlink_DWR-933-5G-xxxx
Password: xxxxxxxxxx
(xxxx is a 4 character code unique to your DWR-933)
Step 3:
Use a web browser to go to 192.168.0.1 to log in to the configuration
interface. The default username is admin, and the password is
admin.
Step 1:
Turn on the DWR-933 by pressing and holding the power button until
the "Welcome" message appears on the display.
Step 2:
Connect the DWR-933 to your PC using the USB cable. The device
should install automatically on modern operating systems.
Step 3:
Use a web browser to go to 192.168.0.1 to log in to the configuration
interface. The default username is admin, and the password is admin.
3