Product Setup - D-Link DWR-933 Guía De Instalación Rápida

PRODuCT SETuP

QuiCK iNSTALLATioN
Step 1:
Lift off the back cover by using the notch on the bottom.
Step 2:
Remove the battery using the notch along the top edge of the battery
bay
Step 3:
Slide the micro-SIM card bracket to the left until it clicks to unlock it,
then lift it open. Place your micro-SIM card in the tray with the notch
situated at the top-right, then close the bracket and slide it to the right
SIM
until it clicks to lock it in place.
Step 4:
If you want to insert a microSD card, push the microSD card bracket
down until it clicks, then lift it open. Place the microSD card in the
SD
indentation, then close the bracket and slide it up until it clicks to lock
it in place.
Step 5:
Reinsert the battery and reattach the battery cover.
Step 6:
Connect the USB cable and plug it into the USB port of a power
adapter or a PC to charge the battery.
2
DWR-933