Servicing Of Double-Insulated Appliances; Important Warnings - Nilfisk-Advance BackVacuum XP Instrucciones De Use

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

(Only for double-insulated, cord-connected appliances):
SERVICING OF DOUBLE-INSULATED
APPLIANCES
A double insulated appliance is marked with one of the
following: The words "DOUBLE INSULATION" or "DOUBLE
INSULATED" or the double insulation symbol (square within a
square).
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means
for grounding be added to the appliance. Servicing a double-
insulated appliance requires extreme care and knowledge of
the system, and should be done by qualified service personnel.
Replacement parts for a double-insulated appliance must be
identical to the parts they replace.

IMPORTANT WARNINGS

1. This machine is also suitable for commercial use, for
example in hotels, schools, hospitals, factories, shops and
offices and for normal housekeeping purposes.
2. This machine is for dry use only and shall not be
used or stored outdoors in wet conditions. Store indoors
between max. 60°C (degrees centigrade) and min. 0°C
(degrees centigrade).
3. The machine must not be used for the suction of water
or other liquids.
4. Live conductors must not be vacuum cleaned by the
machine for dry dust before their current has been switch
off. This is to avoid creating a short-cut through the dust
remaining in the nozzles and tubes.
5. The machine must not be used for picking up
combustible or explosive materials, nor should it be
used in an explosive atmosphere.
6. Under no circumstances should the machine be used for
picking up hot material. In particular the machine must
not be used for cleaning open and closed fireplaces,
ovens or similar that contain warm or glowing ashes.
7. The machine must not be used if the electrical cord or
plug shows any sign of damage. Regularly inspect the
cord and plug for damage, in particular if it has been
crushed, shut in a door or run over.
8. The machine must not be used if it is faulty.
9. Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
10. Always turn off this appliance before connecting or
disconnecting motorised nozzle.
11. When repairing or replacing the cord, the same type of
cord as originally supplied with the machine must be
used. This cord can be supplied by NILFISK.
11a.If the fixed supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
12. The plug must always be removed from the socket outlet
before starting any service work of the machine or the
cord.
13. Disconnect cleaner before servicing and when not in use.
Do not leave unattended cleaner plugged in.
14. No changes or modifications to the mechanical or
electrical safety devices should be made.
INSTRUCTIONS FOR USE
Before using the machine make sure that the frequency and
voltage shown on the rating plate corresponds with the mains
voltage.
Specifications and details are subject to change without prior
notice.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido