Pulse Mode (E.g. Siren Control, Etc.); On/Off Mode (E.g. Lighting, Door Opening, Etc.) - Gorgy Timing RADIO TIMING GTC Manual De Utilización

► Using the «+» or «-» button, select the circuit to be programmed then confirm by
«EntER» button.
The indication PULSE or On/OFF flashes, unless there are already scheduled events
in the selected circuit: In this case, it goes directly to step 1 or 2
► Using the «+» or «-» button, select PULSE or On/OFF mode, then confirm by «EntER»
button

5.3.1. PULSE mode (e.g. Siren control, etc.)

This mode allows you to program, at the beginning of any minute, a relay triggering for
a period of 1-59 sec.
► This screen appears and the
tens of second «c1» flashes.
► Using the «+», «-» and « EntER » buttons, successively adjust the pulse duration
in seconds, the day or week's period, hour and minute of relay activation.
After validation of the unit of minutes, it automatically returns to the tens of second
which flashes to program a new pulse in the selected circuit.
► Press the «Back» button to return to the choice of the relay in case you want to
switch to another circuit.

5.3.2. On/OFF mode (e.g. lighting, door opening, etc.)

This mode allows you to program a contact duration longer than a minute.
► This screen appears and the
day of week flashes.
► Using the «+», «-» and « EntER » buttons, successively adjust the day or week's
period, hour and minute of relay activation.
MDE-Radio-Timing-GTC-3080V2.3
SCHEDULING
AN EVENT
RELAY: C1
00 SEC MON
SCHEDULING
AN EVENT
RELAY: C1
C1= ON MON
TEMPO
08:00
ON/OFF
08:00
51