AXXAIR SX122-A Instrucciones Originales página 24

INNOVATIVE ORBITAL SOLUTIONS
To bring the roller into contact with the tube, loosen the clamping wheel of the tool-holding plate and push
the head until the roller touches the tube. Then continue to push for approximately 5 mm to pre-stress the
spring on the inside of the head.
To adjust the distance between the tube and the electrode, turn the adjustment nut.
Join experience
0
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Tool-holding plate
clamping wheel
Indexing lever at
weld position
Indexing allows the tube to
be released
displacing the machine.
Roller at a tangent to the tube +
pre-stressed spring
Sliding
head
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 24 -
English
without
Adjusting the
tube/electrode
distance