Grandstream IPVT10 Guía De Instalación Rápida página 3

EN
The IPVT10 is not pre-configured to support or carry
emergency calls to any type of hospital, law en-
forcement agency, medical care unit ("Emergency
Service(s)") or any other kind of Emergency Service.
You must make additional arrangements to access
Emergency Services. It is your responsibility to
purchase SIP-compliant Internet telephone service,
properly configure the IPVT10 to use that service, and
periodically test your configuration to confirm that it
works as you expect. If you do not do so, it is your re-
sponsibility to purchase traditional wireless or landline
telephone services to access Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CON-
NECTIONS TO EMERGENCY SERVICES VIA THE
IPVT10. NEITHER GRANDSTREAM NOR ITS
OFFICERS, EMPLOYEES OR AFFILIATES MAY
BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR
LOSS. YOU HEREBY WAIVE ANY AND ALL SUCH
CLAIMS OR CAUSES OF ACTION ARISING FROM
OR RELATING TO YOUR INABILITY TO USE THE
IPVT10 TO CONTACT EMERGENCY SERVICES,
AND YOUR FAILURE TO MAKE ADDITIONAL
ARRANGEMENTS
SERVICES IN ACCORDANCE WITH THE IMMEDI-
ATELY PRECEDING PARAGRAPH.
TO ACCESS EMERGENCY
~ 1 ~
PRECAUTIONS:
• Please keep the equipment dry and avoid violent collisions between
the equipment and other objects during storage, transportation, and
usage.
• Please do not disassemble the equipment. Please contact with
Grandstream support or designated distributor when users encounter
problems.
• Any individual or enterprise may not change the structure, safety
or performance design of the equipment without Grandstream
authorization.
• When using this equipment, users should follow the relevant laws and
regulations, and respect the legal rights of others.
• Before plugging or unplugging the cables of the equipment, users
should stop using the equipment and disconnect the power supply.
• Do not interrupt the power supply during system startup or firmware
upgrade. This may damage the equipment firmware, and cause the
equipment failure.
• Please place the equipment in a ventilated, direct light-free environ-
ment. The operating environment temperature of this equipment is
0°C to 45°C.
• Do not block the openings of the device with any object and leave
more than 10cm of heat dissipation space around the equipment.
• Do not place the equipment at the environment with the following
humidity: 10% - 90% RH (non-condensing).
~ 2 ~