Grandstream IPVT10 Guía De Instalación Rápida página 7

CONFIGURING THE IPVT10 SERVER:
1. Please make sure that the IP address of the PC is under the same
network segment as the server's. If not, users need to go to "Network"
configuration page of the PC to setup the network segment as the same
as IPVT10 server's.
2. Enter the IP address (http://192.168.88.88) of the equipment in the
browser of the PC, and press "Enter" to access the configuration page,
as the screenshot shows below:
3. Input login user name and password.
Note:
Please check the sticker on the device body before first time using the
IPVT10 (Different batch of the IPVT10 device may have the different
default login password). If there is no sticker on the device with the
random default password, the default password of the device is
"change_me". If there is a sticker on the device with the random default
password, please use the password on the sticker on the device body
as the default login password.
4. (Optional) Users could select the language on the list at the bottom of
the configuration page.
5. Click to login to the configuration page.
If there is an IP conflict, users can connect the PC directly to the server via an
Ethernet cable for configuration purpose. Follow the steps below:
1. Unplug the Ethernet cable from the Ethernet Port 1 on the IPVT10
equipment.
2. Then, connect the Ethernet Port 1 and a PC with an Ethernet cable.
~ 9 ~
550W
ROHS
550W
3. Enter the IP address (http://192.168.88.88) of the equipment in the
browser of the PC, and press "Enter" to access the configuration page.
4. Input login user name and password.
Note:
Please check the sticker on the device body before first time using the
IPVT10 (Different batch of the IPVT10 device may have the different
default login password). If there is no sticker on the device with the
random default password, the default password of the device is "change_
me". If there is a sticker on the device with the random default password,
please use the password on the sticker on the device body as the default
login password.
5. (Optional) Users could select the language on the list at the bottom of the
configuration page.
6. Click to login to the configuration page.
Notes:
• After the configurations are complete, users must unplug the Ethernet
cable from Ethernet Port 1, and reconnect the server to the Gigabit
Ethernet switch to ensure that the two Ethernet ports of the equipment
are connected to the Gigabit Ethernet switch.
• For more information, users could go to Grandstream official website
www.grandstream.com/support and download the User Manuals of
IPVT10.
~ 10 ~