Time & Temperature Programming Example - Peco T190 El Manual Del Propietario

press PROG once. One event icon will be lit and the time digits will start flashing. (If
this is the event you want to turn off, proceed to Step 3. Otherwise, keep pressing
PROG until you see the desired event lit then proceed to Step 3.)
3. Press D/T to turn the program on or off. The display shows "--:--" when the program
is turned off. Pressing D/T again toggles between program on and off.
To save this setting and return to Normal Mode, press
Time & Temperature Programming Example
In this example, the thermostat user wants to program the weekend with a different
schedule from the Factory Program. The user wants to program a different time for
the OCC1 event, turn off the program for UNOCC1 and OCC2 events, and keep the
UNOCC2 event unchanged. The user wants the Saturday and Sunday program to be
identical.
Begin by programming Saturday:
1. Press PROG once. One day icon and all four event icons will start flashing.
2. Press ▲ or ▼ to scroll to "SA" (Saturday). To select, press PROG once. (The
"OCC1" event icon will be lit and the time digits will start flashing.)
3. Press ▲ or ▼to scroll time to "8:30". To select, press PROG once. (The HEAT icon
once.
22