Diono quantum Manual De Instrucciones página 13

Attaching your
Diono Radius Infant Car Seat
1
CLICK
Select parent-facing or world-facing for your Radius Infant Car Seat. Position the adapters
so that the "baby image" on the adapters is facing parent-facing or world-facing.
Slot the adapters into both chassis hubs until you hear a click.
2
3
CLICK
Press and hold buttons
Slot and lock Diono Radius
Infant Car Seat into adapters. to remove.
Important: Check that the infant car
seat is secure and cannot be pulled off the adapters.
Other infant car seat brands are compatible.
Check with Diono Customer Care for more information.
13