Auto Power Off; Troubleshooting; Nothing Is Indicated On The Display; Lo" Is Indicated On The Display And The Bathroom Scales Switch Off - Silvercrest SPWC 180 A1 Manual De Instrucciones

In their original state, the bathroom scales are set to the "kg" unit of weight. To change the unit of
weight, press the "Button for setting the unit of weight" (5). The selected unit of weight is then
indicated on the display (1).
Set the desired volume for the engine noise via the volume control (4). In order to deactivate the
engine noise, turn the volume control (4) anti-clockwise until it snaps into place.
Stand on the tread (2) of the bathroom scales so that your weight is evenly distributed. Remain as
still as possible during the weighing process as the measurement result may be distorted otherwise.
The measurement result is indicated on the display (1) during the weighing process. The
measurement is complete when the display flashes.
In order to perform another measurement, you have to step off the tread (2) of the bathroom scales.
Then wait until the display (1) resets itself before stepping on the tread (2) again.

7.2. Auto Power Off

The bathroom scales have an automatic switch-off function (Auto Power Off function).

The bathroom scales switch off automatically about 10 seconds after you step off the tread (2).

If you do not step off the tread (2) after weighing yourself, the bathroom scales also switch off
automatically after approximately 10 seconds.

8. Troubleshooting

8.1. Nothing is indicated on the display.


The batteries are empty. Replace them with new batteries of the same type. Please note the
instructions in section 6.1 "Inserting / changing the batteries".

The batteries are inserted incorrectly. Please note the instructions in section 6.1 "Inserting /
changing the batteries".
8.2. "Lo" is indicated on the display and the bathroom scales
switch off.

The batteries are almost empty. Replace them with new batteries of the same type. Please
note the instructions in section 6.1 "Inserting / changing the batteries".
8.3. The bathroom scales switch off while you are weighing
yourself.

An error has occurred and the bathroom scales cannot measure your weight. In this case,
step off the tread (2) of the bathroom scales and step on it again. The weight measurement
starts again.
SilverCrest SPWC 180 A1
English - 21