Remote Control; Remote Control Overview; Using The Remote Control; Caddy (Optional) - Aquabot Top Access Guia De Inicio Rapido

Remote Control (optional)
This chapter reviews the operation of the optional remote control unit. The remote
control is included in some models.

Remote Control Overview

The remote control is an optional feature that enables controlling the robotic
cleaner via remote command buttons. When pressing the remote control buttons,
radio signal is transmitted to the power and control unit. This signal is transferred
into a command sent to the robotic cleaner via the floating cable.

Using the Remote Control

1. Press the right button (3) to turn the robotic cleaner right. The robotic cleaner
continues turning to the right until the button is released.
2. Press the left button (1) to turn the robotic cleaner left. The robotic cleaner
continues turning to the left until the button is released.
3. Press the Forward/Reverse button (2) to stop the robotic cleaner and change its
direction of movement.
The remote control LED is lit after each command. If the LED does not respond or
flashing, replace the battery.

Caddy (optional)

The caddy is an optional accessory that makes it easy to move the robotic cleaner,
floating cable and the power and control unit from place to place.

Assembling the Caddy

To assemble the caddy, you need a standard screwdriver and a 8 mm wrench.
Connecting the Caddy Handle
1. Fasten the handle bottom part (3) to the caddy frame (5) with the three screws
(4) and nuts.
2. Connect the handle top part (1) to the handle bottom part (3) using screw (2)
and nut.

Loading the Robotic Cleaner on the Caddy

1. Place the cleaner unit on the caddy base.
2. Coil the floating cable and place it on the cleaner unit.
3. Place the power and control unit on top of the floating cable coil.
1. Handle (Top Part)
2. Handle Screws
3. Handle (Bottom Part)
4. Frame screws
5. Caddy Frame
5
1
2
3
4
14