Display Panel Operation - EMOTION BH EVO Manual Usuario

EN
USER MANUAL

Display Panel Operation

The display panel provides the following operations and information screens:
1. Installation of the Fixed or Removable Display Panel.
The side display panel or remote control (for the central version of the display panel) can either be made
fixed or removable, depending on the needs of the user, by simply inserting or removing an M3 screw,
as shown in the image. By default, the side display panel or remote control (for the central version of the
display panel) will be fixed with the screw.
NOTE
Here are the steps to remove the display panel or remote control (for the central version of the display panel)
after removing the screw; follow the instructions below:
1. The user pushes the flap beneath the side display panel or remote control (for the central version of
the display panel).
2. While holding down the flap, the user slides the panel upwards to fully remove it.
3. The panel is released.
36
To reduce the risk of theft, to remove (or insert) the panel's screw, the user must
first loosen the grips, left brake lever, shift lever and the panel's support bracket.
EASYGO / EVO / NITRO / AWD