Bosch AEC-AMC2-EMEA01 Manual De Instalación página 11

AEC-AMC2-EMEA01 - Installation manual
NOTICE!
Connect the readers and other peripheral devices as described
in the AMC Installation Manuals. Route the device cables
through the knock-outs in the top an right side wall of the
housing, or through the rear of the housing.
10. Cable D:
a.
b.
11. Install the fuse.
12. Close the cover.
Bosch Access Systems GmbH
Connect D1 to grounding post 10.
Connect D2 to the grounding post on the cover.
en
F.01U.097.255 | V 4.0 | 2010.10
11