Chauvet DJ JAM PACK DIAMOND Guía De Referencia Rápida página 5

JAM Pack Diamond QRG
External DC
Power
Fog Machine
AC Power
Fog Machine
Fuse
Replacement
The JAM Pack Diamond UV strobe combo and mushroom products have
external auto-ranging power supplies that can work with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
The JAM Pack Diamond fog machine has a fixed voltage power supply and
it can work with an input voltage of 120 VAC at 60 Hz.
The listed current rating indicates the product's average current draw under
normal conditions.
Always connect the product to a protected circuit (circuit breaker or
fuse). Make sure the product has an appropriate electrical ground to
avoid the risk of electrocution or fire.
Always replace a blown fuse with a fuse of the same type and rating.
Never connect the product to a rheostat (variable resistor) or dimmer
circuit, even if the rheostat or dimmer channel serves only as a 0 to
100% switch.
1. Disconnect the fogger from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The product does not ship with a spare fuse; however, the safety cap has
room for a spare.
5
EN