Control Panel - Uniteck UNICHARGE Manual Del Usuario

Dear customer, we thank you for purchasing one of Uniteck products. Please read all instructions carefully
before using the product.
DESCRIPTION
Unicharge is a professional battery charger, ideal for fully and automatically recharging all lead-acid
batteries automatically (without supervision)
- liquid electrolyte
- with gel electrolyte (GEL)
- AGM (or maintenance free)
UNICHARGE 1,5.12
Unicharge 1.5.12 has been designed for recharging 6V (3 cells of 2V) and 12V (6 cells of 2V) batteries
from 8Ah to 40Ah. Using its 4 charging stages, it is ideal for recharging motorcycle, scooter, alarm
batteries etc.
UNICHARGE 4.12 et UNICHARGE 8.12
Using the 8-step charging curve for the 4A model and 9 steps for the 8A model, microprocessor-
controlled, Unicharge 4.12 and Unicharge 8.12 guarantee optimal charging of your batteries and extend
their lifespan to its full potential.
UNICHARGE 4.12 is designed for charging :
- 6V or 12V batteries (3 cells of cells or 6 cells of 2V) from 2 to 80 Ah (maintenance of charges up to
120Ah)
-UNICHARGE 8.12 is designed for charging :
- 12V batteries (6 cells of 2V) from 10 to 160 Ah (maintenance of charges up to 250Ah)
They are particularly suitable for charging batteries for solar, fence, alarm, vehicle batteries (car,
motorcycle, motorhome/caravan, scooter, snow scooter, tractor and agricultural machinery and also for
boats).
Their "Manual charge" function allows recovering very deeply discharged batteries (from 0V) that can not
be recovered with an automatic charge (see part MANUAL CHARGE). The RECOND function (UNICHARGE
8.12 only) restores the batteries which have lost their capacity to store energy due to the lamination of
their electrolyte (see RECOND section).

CONTROL PANEL

UNICHARGE 1,5.12
Green LED :
Charger on
www.uniteck.fr
LED orange : battery charging
Green LED : charged battery
LED off + POWER LED on :
Check your connections
Battery voltage selector 6V / 12V
EN
13/36