POSSIBLE TROUBLESHOOTING
7) Signalling:
"Battery check"
Problem:
The stove does not stop but the error appears on the display.
Actions:
The buffer battery of the control board needs changing (DEALER).
8) Problem:
Remote control not working
Actions:
• closer to the receiver of the stove
• check the battery and if necessary, replace it (see page 34).
9) Problem:
Outlet air not hot
Actions:
• clean heat exchanger from inside the firebox.
10) Problem:
During ignition, the differential switch trips
Actions:
• check moisture content of ignition resistance (DEALER)
The message is displayed until the 0/1 key on the panel is pressed.
Do not restart the stove until the problem has been looked into and the cause removed.
It is important to tell the Dealer exactly what the panel signals.
TELEPHONE COMBINER FOR REMOTE IGNITION (code 281900)
The stove can be ignited remotely by asking the DEALER to connect the telephone combiner to the serial port behind
the stove via the optional cable code 6212402.
GlassKamin
(code 155240)
Used for cleaning the cera-
mic glass
OPTIONAL
CLEANING ACCESSORIES
38
Ash vacuum cleaner
without motor
(code 275400)
User for cleaning the
hearth