Grundig SM 3630 Manual De Uso página 18

OPERATION­ ______________________________
Preparation
Caution­
Switch off the appliance and disconnect from
█
supply before changing accessories or ap-
proaching parts that move in use.
1­­
Remove all packaging and sticker materials
and dispose of them according to the appli-
cable legal regulations.
2­­ Take the entire unit of the motor housing
and place it on a level surface, e.g. on the
kitchen counter.
Caution­
The blade unit is very sharp! Handle the
█
blade unit with utmost care, especially during
cleaning, in order to avoid injuries.
3­­
Clean all parts, with the exception of the
motor housing as described in "Cleaning
C
and Care".
4­­ Then re-assemble the jug blender in the re-
verse order.
5­­ Insert the chopping blade
A by rotating it clockwise. You can see the
"lock" arrow direction at the bottom of the
chopping blade
B
18 ENGLISH
unit onto the jug
B
unit.
6­­
Place the jug
. Lock the jug
C
"lock" arrow on the motor housing
7­­ To release the jug
direction.
C
Lock
Note
Make sure that the notches on the bottom of
█
the jug
A
8­­ Before using the appliance cut the food into
small pieces.
Blending­
1­­
Place the device on an even and dry surface.
The non-slip feet
appliance.
2­­ Make sure that the power cord is disconnected
from the power supply.
3­­ Remove the jug
; to do this, turn the jug
C
clockwise direction and lift it upwards; Turn
of the chopping blade
4­­
Now put the ingredients to be blended in the
jug . The ingredients should only be about
A
2-5 cm long.
Notes
Add water to ensure the jug blender functions
█
smoothly.
A onto the motor housing
A clockwise according to the
, turn it to anti-clockwise
A
Unlock
fit those in the motor housing
ensure the stability of the
F
from the motor housing
A
A
and turn clockwise.
B
.
C
.
C
in an anti-