Mitsubishi Electronic PAR-30MAOA Manual Del Usario página 47

3
Night setback
Night setback No /
Temp. range 19
Start 23:00
Stop 5:00
Select:
Cursor
F1 F2 F3
Night setback
Night setback No /
Temp. range 19
Start 23:00
Stop 5:00
Changes saved
Main menu:
Cool Set temp.
Mode Temp.
Move the cursor to the desired item with the F1
Yes
or F2
- 28
time.
Change the settings with the F3 or F4 button.
Content
F4
Yes
- 28
Start/Stop time: settable in 5-minute increments
* Press and hold the button to rapidly advance
the numbers.
Press the SELECT button to save the settings.
Navigating through the screens
To go back to the Main menu ............. MENU button
To return to the previous screen ......... RETURN button
will appear on the Main display in the Full
Fri
mode when the Night setback function is enabled.
appears when the timer is disabled by the
centralized control system.
Fan
The Night setback will not work in the following cases:
when the unit is in operation, when the Night
setback function is disabled, during an error, during
remote controller diagnosis, when the clock is not
set, during Function setting, when the system is
setting, or Timer operation from local remote
temperature difference between
the lower and upper limits must
settable temperature range varies
depending on the connected
indoor units.
* 1ºC/1ºF increments
47