Mitsubishi Electronic PAR-30MAOA Manual Del Usario página 9

①
Operation mode
②
Preset temperature
③
Clock
(See the Installation Manual.)
④
Fan speed
⑤
Button function guide
Functions of the corresponding buttons
appear here.
⑥
Appears when the ON/OFF operation is
centrally controlled.
⑦
Appears when the operation mode is
centrally controlled.
⑧
Appears when the preset temperature is
centrally controlled.
⑨
Appears when the filter reset function is
centrally controlled.
⑩
Indicates when filter needs maintenance.
⑪
Temperature
(See the Installation Manual.)
Current outlet air temperature appears here.
⑫
Appears when the buttons are locked.
⑬
Page 27, 29, 46
appears when the timer is disabled by
the centralized control system.
⑭
Appears when the Weekly timer is enabled.
⑮
Page 14
Appears while the units are operated in the
Page 15
⑯
Appears while the outdoor units are operated
in the silent mode.
Page 16
⑰
Appears when the thermistor on the indoor
unit is activated to monitor the outlet air
* This icon appears when the remote
controller is connected to the Fresh Air
Intake model. If the icon does not appear,
refer to the indoor unit Instruction Book.
appears when the built-in thermistor on
the remote controller is activated to monitor
the room temperature.
⑱
Indicates the vane setting.
⑲
Indicates the louver setting.
⑳
Indicates the ventilation setting.
Page 59
Appears when the preset temperature range
is restricted.
Appears when an energy-saving operation is
performed using a "3D i-See sensor"
Page 39
function.
Centrally controlled
Appears for a certain period of time when a
centrally-controlled item is operated.
Page 31
Page 44
Page 34
a
Page 22
Page 24
Page 24
Page 37
20
9