What's Next - Microsoft Surface Hub 55 Manual De Instrucciones

B. Depress the levers inside the lifting handle mounting bars, slide them into the device and close the plastic door covers (see image below).
Press to
release
Step 4: Connect cables and attach the column door
WARNING: Cable routing
To reduce risks related to electric shock or trip hazards, ensure cables are routed in such a way as to prevent them from being pinched, crushed, cut, or tripped on.
A. Connect the power, network, and any auxiliary cables to the Surface Hub.
B. Set the hard power switch to "On" (see the Setup Guide in your Welcome Kit).
C. Slide the column door into place on the base, making sure the latches engage.

What's next?

Your Surface Hub is mounted and ready to set up. See the Setup Guide in your Welcome Kit.
Close
door
K
9