Microsoft Surface Hub 55 Manual De Instrucciones página 4

WARNING: Proper installation environment
To reduce risks related to the environment, the unit must be installed indoors only .
Do not leave the unit near sources of high heat or steam or where condensation is likely to occur, such as near air conditioners.
Do not leave the unit on a structure that is prone to vibration or movement.
Do not leave the unit in such a manner as to block ventilation holes. Allow for proper ventilation according to the device specifications.
Do not install in areas with potentially explosive atmospheres. These areas are often, but not always, posted and can include fueling areas, such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air
should not be used in these areas. In such areas, sparks can occur and cause an explosion or fire.
WARNING: Pinch hazard
When assembling the stand and installing the device, take care to avoid pinching fingers.
WARNING: Choking hazard
This device or its accessories may contain small parts, which may be a choking hazard to children under 3. Keep small parts away from children.
WARNING: Small children
This device and its accessories are not toys. To reduce the potential for injury, death or product damage, do not allow small children to play with them. Never allow children to climb on or hang from the device or its stand.
WARNING: Cable routing
To reduce risks related to electric shock or trip hazards, ensure cables are routed in such a way as to prevent them from being pinched, crushed, cut, or tripped on.
WARNING: Proper transport—tip over
To avoid risk of injury or damage to the product due to tip-over or dislodging from the stand when transporting Microsoft Surface Hub on the stand:
Use only the stand provided by Microsoft specific for the model display you have.
Never allow someone to hang from or place heavy weights on the display.
Disconnect the power cord and other cables as needed prior to moving.
Always use two adults to move the stand with the display.
Push or lift the stand only by its designated handles and never push or lift directly on Microsoft Surface Hub.
Avoid pushing or lifting on the screen while the screen is hanging on the stand.
Only adults should move Microsoft Surface Hub and its stand.
Move Microsoft Surface Hub and its stand slowly.
Apply force from the narrow side, not from the wide side.
Always push near the middle. Never apply force at the top.
Always push the stand. Do not pull the stand.
Use caution and move slowly when transporting up or down ramps.
Never leave the stand unattended on or near a ramp.
WARNING: Ensure hardware screws are securely tightened
To reduce the risk of the product falling, ensure that all screws are securely tightened to their specified torque values. Do not overtighten as this may cause damage and weaken the holding strength.
2
K