ION Audio Insta Sound Guia De Inicio Rapido página 5

Stereo-Link™ and Bluetooth Connecting to Insta Sound
1. Power on each Insta Sound by pressing and releasing their power buttons. You will hear
"Powering On" for confirmation. *
2. The 2 speakers will automatically initiate the wireless stereo linking process. The speakers
will search for each other indicated by their blinking yellow LEDs. Once the stereo pair is
successfully linked, you will hear "Connected", the yellow LEDs will be solid, and the
"master" speaker's blue LED will blink to indicate it is in Bluetooth pairing mode.
This process may take up to 2 minutes the first time two speakers are linked. Speakers
that were previously linked will relink automatically in seconds if powered on in range of
one another.
Note: Insta Sound speakers should be within 30 ft. (9 m) of each other to Link properly.
3. When the stereo link is confirmed by the solid yellow LED, the blue LED on the "master"
speaker will begin to blink to indicate that it is ready to pair with your Bluetooth device.
Note: The Left channel will be the "master" speaker, and the unit from which the Bluetooth
range will be determined.
4. On your Bluetooth device, navigate to your Bluetooth settings menu, find Insta Sound,
and connect. Once the Bluetooth connection is made, the blue LED will be lit solid. You
will hear "Paired" for confirmation.
Note: If you experience trouble in connecting, select "Forget this Device" for Insta Sound
on your Bluetooth device and try to connect again.
If your Bluetooth device is not able to connect to Insta Sound, while powered on, press
and hold the Bluetooth button for 2 seconds to break previous Bluetooth connections.
Press and hold the Reset button for 5 seconds to reset the device. This will clear the
memory of existing paired Bluetooth devices.
Single Speaker Mode
If you want to use only 1 Insta Sound speaker, you can enter Single Speaker mode. While the
unit is powered off, press and hold the Power button on the speaker. After the Insta Sound
powers on, while still holding the Power button, press and hold the Bluetooth button for 2
seconds. The yellow LED will be unlit, and the Blue LED will blink to confirm the speaker is
now in Single Speaker mode. Proceed to connect to Insta Sound in your Bluetooth device's
Bluetooth menu. To revert back to Stereo mode, power the speaker off then back on.
5