Ce Declaration Of Conformity - GMC GPM1600 Manual Del Usuario

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation
Legislation.
Identification code: GPM1600
Description: 1600W Plaster Mixer 160mm
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• EN60745-1:2009+A11:2010
• EN60745-2-1:2010
• EN61000-3-2:2014
• EN61000-3-3:2013
• EN55014-2:2015
• EN55014-1:2006+A1:2009+A2:2011
Notified body: Intertek
The technical documentation is kept by: GMC
Date: 01/06/16
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox,
Boundary Way, Lufton Trading Estate, Yeovil, Somerset BA22 8HZ, United Kingdom.
Specification
Model number:
Voltage:
Power:
No load speed:
Output drive thread:
Mixing paddle diameter:
Mixing capacity:
GB GB
Power cord length:
Ingress protection:
Protection class:
Weight:
Sound and vibration information:
Sound Pressure L :
PA
Sound Power L :
WA
Uncertainty K:
Weighted vibration a (main handle):
h
Uncertainty K:
As part of our ongoing product development, specifications of GMC products may alter
without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
5
GPM1600
230V ~ 50Hz
1600W
180-460/300-700min -1
M14x2 female thread
160mm
160Ltr
2.5 m
IP20
6.5kg
87dB(A)
98dB(A)
3dB
3.02m/s
2
1.5m/s
2
GB