hager WDI07 Serie Manual Del Usaurio página 23

Figure 13 a/b: Flush wall mounting installation in the flush-mounted housing
(17) Flush-mounted housing, flush-to-wall (not within scope of delivery)
Dismantling the device
If a device is mounted flush with the
„
wall, loosen it from its fastening in the
flush-mounted housing by applying even,
slight pressure and release.
The device will move slowly forward out of
the housing.
Loosen the screws and remove the device
„
from the housing.
Remove connections.
„
z
(22)
(23)
(22)
23